Double Wall IC Airtight for direct contact with insulation
Easy-to-Remove driver
USA designed and assembled
Flicker Free Dimming
Optional: 90 minutes, 120/277 VAC, 60Hz, Emergency Backup: Sold Separately!
5 year factory warranty (limited)
UL Listed for Damp Locations and Wet Locations with Select Trims
UL Listed for Direct Contact with insulation and Combustible materials
UL Listed for Feed Through
Features
Construction ▪ Double Wall IC Rated for direct contact with insulation, for use in IC and non-IC conditions. Up to 1,500lm. ▪ Housing accommodates up to 1 1/2" ceiling thickness. Suitable for T-grid and drop ceiling applications. ▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. ▪ Designed for ceiling plenums where 2x6 joists or taller are used. High strength hanger bars can easily be nailed to joists.
Junction Box ▪ Positioned to accommodate straight conduit runs. ▪ Seven (7) 1/2" trade size conduit knockouts, Two (2) 3/4" knockouts, One (1) 3/8" knockout. ▪ Four (4) Pry-out knockout slots for easy Romex installation. See installation sheet for detailed information
Hanger Bars / New Construction ▪ Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. ▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.
Electrical ▪ Driver is rated for 120V and 277V input (120/277V). High efficiency driver with a power factor >0.95. Note that double wall housings require access from above ceiling for battery maintenance.
Dimmability ▪ 3-in-1 dimming. Triac, ELV and 0-10V dimming in one driver. 0-10V dimming down to 5% with a compatible dimmer. Can be specified with Lutron drivers for 0.1% and 1% dimming.
Compatible Trims ▪ Compatible with - For use with ELCO Koto Architectural LED Light Engines (ELK21 Series Only).
Listing ▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims. ▪ UL Listed for Feed Through. ▪ UL Listed for Direct Contact with Insulation and Combustible Materials.
